5th Wheel to Gooseneck Adapters
|
Convert-A-Ball Adapters
|
Adjustable Convert-A-Ball Cushioned Gooseneck Adapter - C5G
- Converts Your 5th Wheel Into A Gooseneck Within Minutes.
- No Drilling Or Welding Required. Mounts Directly To King Pin Of The Trailer. If You Would Like To Make It a Permanent Connection, It Has Predrilled Holes And Includes Attachment Hardware.
- Rated to 20,000 lb. GVW, 4,000 lb. Tongue Weight
- Cushioned 360 Degree, Plus Up and Down - This Takes the Beating as Opposed to the Trailer or the Truck
- Includes Safety Chains
- Positive Lock Coupler
- Can Attach Padlock To Secure Trailer When Connected or Parked
- Adjust from 12" to 16" To Make The Trailer Level
- Height is Measured From The Top of the Ball to the Bottom of the King Pin Box
(the box which the king pin is attached to).
Adjustable from 12 - 16 Inches In Height
|
|
Click Here To View A Video of the Installation & Use of the Convert-A-Ball Gooseneck Adapter
|
Adjustable Convert-A-Ball Cushioned Gooseneck Adapter With 7 1/2" Offset For Short Bed Trucks
- Converts Your 5th Wheel Into A Gooseneck Within Minutes.
- Mounts Directly To King Pin Of The Trailer. You Must Drill At Least 2 Holes Into King Pin Box - It Has Predrilled Holes And Includes Attachment Hardware.
- Rated to 20,000 lb. GVW, 4,000 lb. Tongue Weight
- Cushioned 360 Degree, Plus Up and Down - This Takes the Beating as Opposed to the Trailer or the Truck
- Offset 7 1/2" for Short Bed Trucks
- Includes Safety Chains
- Positive Lock Coupler
- Can Attach Padlock To Secure Trailer When Connected or Parked
- Adjust from 12" to 16" To Make The Trailer Level
- Heights is Measured From The Top of the Ball to the Bottom of the King Pin Box
(the box which the king pin is attached to)
- NOTE: This is NOT recommended for king pins that are already extended
Adjustable From 12-16 Inches in Height
|
|
Click Here To View A Video of the Installation & Use of the Convert-A-Ball Gooseneck Adapter
|
|
Andersen Adapters
|
Andersen Universal Ranch Hitch Adapter
- Converts Your 5th Wheel Into A Gooseneck Within 60 Minutes
- The Ranch Hitch Adapter is the only 5th wheel to gooseneck adapter on the market that is V19 Certified - the strongest
safety certification available for gooseneck connections
- The Ranch Hitch Adapter is very easy to use. Most gooseneck receivers require you to get into the bed of your truck to
latch the coupler; not so with the Ranch Hitch Adapter. The remote cable mechanism allows you to engage and release the
coupler while standing on the ground outside your pickup. The bell shaped receiver allows for the hitch ball and adapter to
be as much as 3" off center, and still slide into place correctly.
- 3" Vertical Adjustment
- Belled Coupler Allows For Hookup Up To 3" Off Center
- Measures 11 3/4" to 14 3/4" From Bottom of King Pin Box to Top of The Ball
- Rated to 24,000 lb.
- 6,000 lb. Tongue Weight
- Only adapter with remote coupler release
- Note: The Ranch Hitch is not recommended for cushioned pin boxes
Standard Model
|
Extended Model With 8" Offset for Short Bed Trucks
|
|
Ranch Adapter Options:
|
|
|
Andersen ALUMINUM Ultimate 5th Wheel Connection 2 - Gooseneck Version
- Will not void an RV warranty
- Keep your 5th Wheel warranty intact!
- Works with all standard brands of gooseneck hitches
- Base weighs only 35lbs!
- Features new ball-funnel for easy hook up - even if you are 3" off ball center!
- Base can be removed or installed in less than a minute!
- Complete installation in less than 5 minutes!
- Can easily be installed or removed by just one person!
- Features a patented remote latch/unlatch cable
With Ball-Funnel For Easier Hook-Up
- Rated at 24,000 lbs GTWR and 4,500 lbs tongue weight
- The smoothest ride around - owners are saying they can't believe there's no bucking and no chatter compared to other products on the market
- Three height adjustments: 16-3/4" lower position, 17-7/8" middle position and 19-1/8" upper position (from bed of truck to top of ball mount)
- Made in the USA!
|
Click Here To View Video of the Installation of the Ultimate Connection
|
Andersen ALUMINUM Ultimate 5th Wheel Connection 2 Lowered 4" - Gooseneck Version - Used For Trucks With Gooseneck Ball In A Trap Door
- All The Features of The Andersen 3220 But Stem Lowered 4"
- With Ball-Funnel For Easier Hook-Up
- Ball Cannot Be More Than 4" Below the Flat Bed
|
Optional Accessory
|
Safety Chains For Andersen Ultimate 5th Wheel Connection
|
|
|
Pull-Rite Super 5th 24K
|
Pull-Rite Super 5th 24K Gooseneck Adapter
- Converts Your 5th Wheel Into A Gooseneck Within Minutes. All You Need Are Wrenches.
- This Adapts To Gooseneck Ball In The Bed. No Drilling Or Welding Required.
- Rated to 24,000 Pounds Max Gross Trailer Weight Towing Capacity; 6,000 Pounds Max Trailer Pin Weight Capacity
- Lightweight, High Grade Steel Hitch Vs. Weaker Aluminum Models
- Detachable Baserails Reduce Stress On Truck Bed To Minimize Crushing And Surface Wear
- Flexible Design Allows Fifth Wheel King Pin To Be Positioned Forward Or Rearward Of The Gooseneck Ball By As Much As 8 Inch
- Vertical Height Adjustment From 15.7 Inch To 18.7 Inch; Dual Articulating Head Moves Side-To-Side And Front-To-Back During Towing For A Smoother Ride
- Hitch Head Easily Removable With Pins And Clips No Tools Needed; Locking Jaw Closes Automatically Around King Pin
- Latch Handle Locks Automatically When Locking Jaws Are Engaged; No Secondary Locking Devices To Engage Means No Reaching Over High-Sided Truck Beds To Get Dirty
- Extended Handle Keeps You Out Of The Bed; Tight Fitting Parts Give You The Best Ride Possible
- Precision, Laser Cut Jaw Components Cradle The Trailer's King Pin 140 Degree For A Secure, Tight Fit
- Limited 5 Year Warranty Or Limited 31,068 Mile Warranty Or Limited 50,000 Kilometer Warranty
- Made in the USA
|
|
|
Pull-Rite SuperLite 20K
|
Pull-Rite SuperLite 20K Gooseneck Adapter
- Converts Your 5th Wheel Into A Gooseneck Within Minutes. All You Need Are Wrenches.
- This Adapts To Gooseneck Ball In The Bed. No Drilling Or Welding Required.
- Rated to 20,000 lb.
- Flexible Design Allows King Pin To Be Positioned Rear Of The Axle Allowing For a Tighter Turning Radius
- During Vehicle Stpos & Starts, Bed Saver rails Stay Flat against the bed, which distribute tourquing stresses across the bed channels
- Funneled Ball Receiver and King Pin Adapter are completely visible from the driver's seat for most truck/trailer combinations
- Coupling/Uncoupling can be performed in a straight line or any angle to the trailer
- No need for exacting trailer height adjustments while hitching up
- Funneled Ball Receiver gives you successful hitching without perfect hitch-to-trailer alignment every time
- Easily reachable with the Remote Handle Latch and easily operated by anyone
- Gooseneck trailer owners don't need to climb into the bed to latch your hitch
- Fifth wheel trailer owners no longer need a step stool for trucks with high bed sides and/or dually's to reach secondary safety pins for
your fifth wheel hitch
- Made from High-Grade, USA made steel & Weights 64 lbs.
- Made in the USA
|
|
|
Blue Ox Adapter
|
Blue Ox Super Ride Slider Gooseneck Adapter
- Converts Your 5th Wheel Into A Gooseneck Within Minutes. All You Need Are Wrenches.
- THis Adapts To Gooseneck Ball In The Bed. No Drilling Or Welding Required.
- Rated to 20,000 lb.
- Easy - Self-Locking Hitch Head. Quick And Easy Hook Up. Latch Engages The Kingpin In A Full 360 Degrees
- Comfort - The Hitch Head Is Cushioned By 4 Rubber Springs To Smooth The Ride, Eliminating Bucking And Stress On The Truck And Trailer
- Travel - 11 Inch Of Articulating Travel For Maneuvering Clearance To Prevent The Trailer From Striking The Cab Of Short Bed Trucks
- Convenient - Lightweight, Modular Design Enables One Person Installation And Removal
- Limited Lifetime Warranty
BX_BXR6200...$1,299.00 (WHILE SUPPLIES LAST - MUST BE PURCHASED AT HITCH CORNER)
|
|
|
Pop Up Industries Adapters
|
Pop Up Industries 5" Offset Gooseneck Adapter
- Converts Your 5th Wheel Into A Gooseneck Within 30 Minutes.
- No Welding Required, But Drilling Required.
- Can Be Moved From One Trailer to Another
- Remotely Actuated 2 5/16" Coupler. To uncouple you simply pull a release cable at the trailer jack.
- 4 Height Adjustments in1" Increments (From 12 1/2" to 16 1/2" From Bottom of King Pin Box to Top of Ball)
- 5" Offset for Added Maneuverability
- Utilizes a Strong King-Pin Clamp
- Rated to 24,000 lb., 6,000 lb. Gross Tongue Weight
|
|
Pop Up Industries 9" Offset Gooseneck Adapter
- Converts Your 5th Wheel Into A Gooseneck Within 30 Minutes.
- No Welding Required, But Drilling Required.
- Can Be Moved From One Trailer to Another
- Remotely Actuated 2 5/16" Coupler. To uncouple you simply pull a release cable at the trailer jack.
- 4 Height Adjustments in1" Increments (From 12 1/2" to 16 1/2" From Bottom of King Pin Box to Top of Ball)
- 9" Offset for Added Maneuverability on Short Bed Trucks
- Utilizes a Strong King-Pin Clamp
- Rated to 24,000 lb., 6,000 lb. Gross Tongue Weight
|
|
Pop Up Industries Standard Gooseneck Adapter
- Fits standard OEM trailer king pin boxes ONLY.
- Self-latching GN8 2-5/16" coupler.
- Coupler is drilled for a pad lock.
- Precision coupler casting extends life of ball.
- 4" height adjustment in 1" increments. Just Pull The Pin, Adjust & Re-Insert Pin.
- Durable Powder coated finish.
- Easy bolt-on installation.
- No Welding Required, but Drilling Required.
- This Has No Offset
- Can Be Moved From One Trailer to Another
- Remotely Actuated 2 5/16" Coupler. To uncouple you simply pull a release cable at the trailer jack.
- 4 Height Adjustments in 1" Increments (From 12 1/2" to 16 1/2" From Bottom of King Pin Box to Top of Ball)
- Utilizes a Strong King-Pin Clamp
- Rated to 24,000 lb., 6,000 lb. Gross Tongue Weight
|
Click Here To For Instructions for The RV3
|
RV4 - Pop Up Industries 9" Offset Gooseneck Adapter for FLATBED TRUCKS
- Converts Your 5th Wheel Into A Gooseneck Within 30 Minutes
- The RV4's are designed for use with flatbed pickup trucks. They do not offer enough clearance over the side rails for
standard pickup beds.
- Fits standard king-pin box
- Self-latching GN8 2-5/16" coupler
- Precision coupler casting extends life of ball
- 9" offset for more trailer swing, added maneuverability
- 7-1/2" fixed height for flat bed trucks - 4" From Top Of Ball To Plate For The Stem
- GREAT FOR TRUCKS WHERE GOOSENECK IS IN A TRAP DOOR
- Black Powder coated finish
- Easy bolt-on installation
- 24,000 lbs. Gross Trailer Weight
- 6,000 lbs. Gross Tongue Weight
|
|
RV4XL - Pop Up Industries 9" Offset Gooseneck Adapter for FLATBED TRUCKS WITH RECESSED BALL
- Converts Your 5th Wheel Into A Gooseneck Within 30 Minutes
- The RV4XL's are designed for use with flatbed pickup trucks with a recessed ball. They do not offer enough clearance over the side rails for
standard pickup beds.
- Fits standard king-pin box
- Self-latching GN8 2-5/16" coupler
- Precision coupler casting extends life of ball
- 9" offset for more trailer swing, added maneuverability
- 11 1/2" fixed height for flat bed trucks - 8" From Top Of Ball To Plate For The Stem
- GREAT FOR TRUCKS WHERE GOOSENECK IS IN A TRAP DOOR
- Black Powder coated finish
- Easy bolt-on installation
- 24,000 lbs. Gross Trailer Weight
- 6,000 lbs. Gross Tongue Weight
|
|
