Effortlessly loads and unloads your ATV/UTV in seconds
Seamlessly connects to your truck's 2" Receiver Hitch
Easily assembles in less than 20 minutes
Conveniently hangs on your garage or shop wall when not in use
Readily provides two ground-clearance settings for both highway and off-road travel
Completely maintenance free
Most ATVs and small- to mid-size UTVs will fit into the bed of a full-size truck.
Our standard-length ramps can accommodate machines with a maximum wheelbase length of 84 inches.
With the addition of the MAD-RAMPS Extensions (SOLD SEPARATELY), the MAD-RAMPS system can accommodate machines with a maximum wheelbase length of 114 inches.
Mad-Ramps - Snowmobile Add-On Kit To Carry a Snowmobile
This is an Add-On To The Mad Ramps, So You Need The Mad Ramps As Well
The safest, easiest, and most convenient way to transport your snowmobile.
Eliminate the dangers of traditional ramps and sled decks and the hassles of hauling a trailer.
This item is for the MAD-RAMPS Snowmobile Kit ONLY - This connects to the Mad Ramps.
Center ramp and adjustable pedestal allows the track to pull the sled into the truck bed while keeping some of the snowmobile weight off the tailgate to help
protect it from damage
Custom plastic inserts for outer ramps to prevent damage to the skis
Protects the snowmobile from branches and debris by keeping the snowmobile in the truck bed behind the cab vs. a sled deck
Polycarbonate spacers to set ramp width to the snowmobile stance
Converts back in minutes to haul an ATV/UTV
Includes Bed Guards to protect your truck bed from the snowmobile's skis
BO-Mad-Ramps-Snowmobile-Add-On...$ 1,099.99
Motorcycle Ramps
Big Boy II Motorcycle Ramp
The Big Boy 2 loading ramp is by far the most innovative ramp system to hit the market! Packed full of features allowing
you to load not just motorcycles, but ATV's, golf carts, UTV's, zero turn lawnmowers, and just about any pneumatic wheel
vehicle up to 2500 lbs.!
The Big Boy 2 is constructed of lightweight, rustproof aluminum and consists of 2 separate single runner ramps that can
be connected together with (4) included connecting brackets. The ramp system can be folded in half at the center for storage,
and when unfolded, features a 12 degree offset for greater clearance for lower vehicles
The Big Boy 2 is 10 feet long to meet most loading height requirements and is 38 inches wide when both ramps are
connected together(19" wide per ramp)
The ramps folded dimensions are 60.5" Long x 38" Wide x 7.5" High
The whole system only weighs 86 lbs.
Each Big Boy 2 includes 2 cam buckle straps for loading safety and a 5 year manufacturers warranty MF2-12038-Big_Boy...$709.00
Black Widow Motorcycle Ramps
The Black Widow motorcycle loading ramp system is an all aluminum, multi-purpose, heavy duty aluminum ramp system that
works for motorcycles, Atv's, tractors, or just about anything that needs loading.
The Black Widow is a full 40 inches wide when bolted together and is available in 2 lengths to accommodate most loading
heights
This ramp has 3 heavy duty sections which can each be used separately or can all be bolted together for one rock solid
system. This extra wide system makes loading a motorcycle with one person a snap. This system is an indispensable tool to
the user who owns multiple recreational vehicles that need loading but does not want to spend a fortune on multiple systems.
Features:
Fold to half their length for easy storage and transport
Ramps bolt together for added strength for loading heavier bikes
Lightweight all aluminum design w/ black powder coat
Designed to walk up or ride bike up and down
1500 lb. total capacity
Arched design to increase clearance
Serrated cross rungs for maximum traction
3 heavy duty 1" wide cam buckle safety straps
Full width plate style attaching lip
Designed for 1 person loading and unloading
5 year manufacturer warranty
Folded length of 48 1/2" Long Ramps (97" total when unfolded) BW-9440-HD...$439.00
Folded Length of 54 1/2" Long Ramps (108" total when unfolded) BW-10840-HD...$509.00
Light Duty Single Folding Motorcycle Ramp
Our light duty single folding motorcycle ramps are designed for loading of off road and motocross bikes
These ramps are available with our plate style solid surface
They are all aluminum and fold in half for compact storage
Features:
Folds in half for storage & transport
Lightweight All aluminum
Arched design to increase clearance
Serrated cross rungs for maximum traction
Heavy duty 1" wide cam buckle safety strap
Rubber coated fingers protect tailgate
750 lb. weight capacity
45" Folded Length (90" Unfolded)
11 1/4" Wide
Economical Motocross ramp
AFP-9012-HD...$119.00
Black Widow Single Folding Motorcycle Ramp
The Black Widow single folding motorcycle ramp is an 17" wide motorcycle loading ramp that folds to half it's length for
compact storage. The extra width of this single loading ramp makes it much more forgiving than most single runner ramps
when pushing up a street bike or off road bike .
Features:
Folds in half for storage and transport
Extra wide design is more forgiving when pushing a bike up
All aluminum with black powder coat
Arched design to increase clearance
Serrated cross rungs for maximum traction
Heavy duty 1" wide cam buckle safety strap
Full width plate style attaching lip
1500 lb. weight capacity
5 year manufacturer warranty
Folded length of 48 1/2" Long Ramps (94" total when unfolded) BW-9417-HD...$239.00
Folded Length of 54 1/2" Long Ramps (108" total when unfolded) BW-10817-HD...$269.00
Folding Motorcycle Trailer Ramp - Aluminum
The TF-6150 is a tri-folding motorcycle trailer ramp for loading a bike onto open and enclosed trailers
This ramp has a full width attaching lip to fit on almost any trailer & folds to 1/3rd its width so it can be easily
stored on any trailer
The 50" of width allow the rider to put their feet down when loading
The heavy duty center takes a bike up to 1500 lbs. & the ramp also can load Atv's, small garden tractors & more.
Features:
Folds down to 17" wide for compact storage
Wide enough to put feet down, designed to ride up
Works for motorcycles, ATV's, garden tractors & more
50" wide full attaching lip
60" Long
All Aluminum construction
2 heavy duty 1" cam buckle safety straps
Designed for 1 person loading & unloading
1500 lb. weight capacity
Serrated rungs for maximum traction
TF-6050-1500A...$309.00
ATV Ramps
Economy Dual Folding Aluminum ATV Ramps
Our AF series dual aluminum folding arched ramps are designed for loading Atv's and small garden tractors onto low &
mid-height pick up trucks and all trailers
These economical ramps are popular among customers because they are light weight, compact, and low in cost
You will find that these light weight power houses are impossible for your customers to resist.
Features:
Folds in half for storage & transport
Lightweight All aluminum
Arched design to increase clearance
Serrated cross rungs for maximum traction
2 included safety straps
Rubber coated fingers protect tailgate
550 lb. weight capacity per ramp (1100 lb. set)
The ramps folded dimensions are 45" Long (90" long unfolded)
The whole system only weighs 14 1/2 lbs. per ramp (29 lbs. for both) AFL-9012-2...$209.00
Bi-Folding Aluminum ATV Ramps
The IBF bi-folding series of ramps fold to half their width and can be deployed in seconds.
Features:
Lightweight All aluminum
Folds to 1/2 its width
2 included safety straps
Rubber coated fingers
1200 lb. weight capacity
Serrated rungs or square rung design
2 Styles
The IBF-7144 is a 71" long by 44" wide lightweight bi-fold ramp with serrated circular cross bar rungs and rubber fingers.IBF-7144...$183.00
The IBF-7148 is 71" long and 48" wide for loading wider Atv’s. It folds in half and has a light weight square bar cross rung design.
IBF-7148...$191.00
Bi-Folding Steel ATV Ramps
Simple, easy, and effective
These bi-folding atv ramps are all that's needed to load an ATV or quad into the back of your pickup truck
Constructed of 1" tubular steel, powder coated black and held together with durable steel hinges
Fold the ramp in half and it will store underneath an ATV. Rubber coated fingers protect from scratching the tailgate
and secures with included safety straps
The 1000 lb. total capacity.
Features:
Folds to half its width
Ramps slide under atv for storage and transport
Strong, durable 1" steel tube construction
Powder coated black
6.5" rung spacing
2 included safety straps
Rubber coated fingers protect tailgate
1000 lb. weight capacity
The ramps folded dimensions are 74" Long x 22" Wide x 2.75" High
The whole system only weighs 36 lbs. ST-BF-7444...$155.00
Snowmobile Ramps
Black Ice Snowmobile Ramps
The lightweight aluminum Black Ice ramps work great for loading snowmobiles into trailers or pickup trucks with only one person
Easy-glide polyethylene runners on both sides of the ramp protect skis
The ramp rests on the tailgate with 4" rubber-coated fingers to prevent the tailgate from being scratched and secures to
the truck with the included cam buckle safety straps
Black Ice ramps have a trifold design making them easy to move around and store.
Features:
SNO-6054-HD recommended for trailers only
SNO-9454-HD recommended for full size 4 x 4 trucks
Trifold design for storage and portability
Lightweight aluminum construction
Easy-glide polyethylene runners protect skis
4" rubber coated ramp fingers protect tailgate
Includes two cam buckle safety straps
1 year warranty
SNO-6054-HD - 60" L x 54" W x 2" H
Weighs 32 lbs. & Has a 1,500 lb. Capacity SNO-6054-HDXW...$274.00
SNO-9454-HD - 94" L x 54" W x 2" H
Weighs 52 lbs. & Has a 1,500 lb. Capacity SNO-9454-HDXW...$399.00
UTV, Small Garden Tractors & Motorcyle Ramps
Black Widow Universal Ramps
The Black Widow motorcycle loading ramp system is an all aluminum, multi-purpose, heavy duty aluminum ramp system that
works for motorcycles, Atv's, tractors, or just about anything that needs loading.
The Black Widow is a full 40 inches wide when bolted together and is available in 2 lengths to accommodate most loading
heights
This ramp has 3 heavy duty sections which can each be used separately or can all be bolted together for one rock solid
system. This extra wide system makes loading a motorcycle with one person a snap. This system is an indispensable tool to
the user who owns multiple recreational vehicles that need loading but does not want to spend a fortune on multiple systems.
Features:
Fold to half their length for easy storage and transport
Ramps bolt together for added strength for loading heavier bikes
Lightweight all aluminum design w/ black powder coat
Designed to walk up or ride bike up and down
1500 lb. total capacity
Arched design to increase clearance
Serrated cross rungs for maximum traction
3 heavy duty 1" wide cam buckle safety straps
Full width plate style attaching lip
Designed for 1 person loading and unloading
5 year manufacturer warranty
Folded length of 48 1/2" Long Ramps (97" total when unfolded) BW-9440-HD...$439.00
Folded Length of 54 1/2" Long Ramps (108" total when unfolded) BW-10840-HD...$509.00
(c) Copyright 2023 Hitch Corner, Inc.
10677 W. Centennial Rd. #103
Littleton, CO 80127
Littleton - 303-904-1558
Denver - 720-277-7782